Mercury Vapor/Chlorine Gas Cartridge/Filter

Description

3M Mercury Vapor/Chlorine Gas Cartridge/Filter 3MM60929, P100 Respiratory Protection
Respirators are used as a safety device to protect workers from inhaling dangerous substances such as chemicals and infectious particles. Respirators are one of the most important pieces of protective equipment for working in hazardous environments and selecting an appropriate respirator requires an assessment of all the workplace operations, processes or environments that may create a respiratory hazard. By identifying the hazard and its airborne concentrations, workers can determine a proper respirator and correct cartridge and/or filter. This assessment should be done by experienced safety personnel or by an industrial hygienist.

NIOSH approved against mercury vapor or chlorine and certain particulates. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders. When properly fitted, helps provide respiratory protection from mercury vapor or chlorine and certain particulates at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use in environments that are immediately dangerous to life or health (IDLH). Note: The mercury vapor end of service life indicator must be readily visible without manipulation when wearing the respirator. If not readily visible, do not use.